DIMENSIONAL & PERFORMANCE
CHARACTERISTICS OF TPI's
ReliaTouch Transparent Resistive 5-Wire
Analog Touchscreens

Light Transmission:

75 - 83 %* Average VLT** (Without CEF***)
55 - 65 % Average VLT (with CEF)

Life:

Over 1,000,000 Actuations At a Single Point

Actuation Force:

1 - 4 Ounces
(Contact Factory For Higher Actuation Force Settings)

Environmental Characteristics:

  Operating Storage
Temperature: 0 - 65 șC -20 - 70 șC
Humidity: 5 - 95% 5 - 95%
(Contact factory for environmental requirements outside the standard range)

Non-Linearity:

Average: Less Than 1% or 0.1 in.
(Whichever Greater)
Maxim Less Than 3% or 0.2 in.
(Whichever Greater)
Resolution: Limited Only by Controller

Electrical Characteristics:

Input Voltage: 2 - 5 Volts DC
Current: : 50 mA Max.- 5 Volts DC
Sheet Resistivity: 300 (Standard)
(Contact Factory for Other Available Resistivities)

 Front Surface/Overlay Characteristics:

Untreated Polyester (Standard)

Options:

Hard-coat**** (H/C)

H/C & Anti-glare***** (A/G)

Contrast Enhancement Filter with H/C or H/C and & A/G

Dimensional Tolerances:

Options: ± .030 in.
Tail Length: ± .050 in.
Thickness:
± .020 in. Typical (Varies With Choice of Substrate And Different Options)
Printing:
± .010 in. for Two or More Images on the Same Layer
± .020 in. for Layer-to-Layer Registration

* Per ASTM STD D 1003
** Visual Light Transmission
*** Contrast Enhancement Filter
**** Taber Abrasion Test Per ASTM STD D 1044; CS-10F Wheel 500 Grams; Less Than 5% haze.
***** Gloss Measurement Per ASTM STD D 1003; 90% Standard; 55%, 75% & Hi-Gloss Also Available.

Transparent Products, Inc.
28064 Avenue Stanford Valencia, CA 91355
Tel 661.294.9787 - Fax 661.294.9785

Home | Products | Company | E-mail | Additional Information